Seymour Duncan Mag Mic Acoustic System

Why mix a magnetic pickup with a microphone? Because, the magnetic pickup senses the guitar string's vibrations and the microphone accurately reproduces the complex and rich character of the acoustic tone. Blended together, the result is the most natural-sounding, three dimensional, acoustic guitar soundhole pickup. Ever!!!

Introducing the Mag Mic. The first active, humbucking, magnetic soundhole pickup featuring a built-in microphone and blend circuit, together with adjustable pole pieces. Installation is a snap. And the sound is amazing! From deep, rich lows, to percussive mids, to shimmering highs, the entire tonal spectrum of the acoustic guitar is accurately duplicated and amplified.

Magnetic Pickup Microphone Capsule DC Resistance 3.8K Ohms Pattern Omni-directional Resonant Frequency 16K Hz Sensitivity -35dB Gauss Strength 780 max (adjustable) Frequency range 20 to 20 KHz S/N ratio >62dB Current consumption 0.5mA Onboard Electronics 2 Channel Supply Voltage 9V dc Current consumption 1.1mA (preamp + mic capsule) Battery Life 450+ hours Maximum signal swing 1.5V @ onset of clip w/9v power supply Thd .02% @ onset of clipping Noise Pickup channel --102dBV with 5k ohm source impedance Mic channel --96dBV with mic capsule attached

The Mag-Mic has been designed to mount off-center in the soundhole, towards the neck. In this configuration it will accommodate soundhole diameters from "3.85" to "4.10".