Electric Guitar & Bass Wire, Shielding & Solder Supplies

Vintage style cloth covered stranded wire (22 Gauge) Typical wire type used by Fedner and other guitar builders for vintage style wiring and vintage guitar repairs. Pre-tined for easy soldering. 2.5 feet black + 2.5 feet white (5 feet total)

Quantity

Vintage style cloth covered wire with braided shielding (22 Gauge-5 feet). Typical wire type used by Gibson and other guitar builders for vintage style wiring and vintage guitar repairs. Pre-tined for easy soldering.

Quantity

Pro grade "no clean" electronics solder (.031 inch diameter-5 Feet). Recommended for soldering smaller guitar electronic parts and circuit boards. Flows easily at lower temperatures and leaves no corrosive residue eliminating the need to clean connections after soldering. This is the same solder our repair techs use every day!

Quantity

Pro grade "no clean" electronics solder (.05 inch diameter-5 Feet). Recommended for most guitar electronics projects. Flows easily at lower temperatures and leaves no corrosive residue eliminating the need to clean connections after soldering. This is the same solder our repair techs use every day!

Quantity

Original EMG brand output connector and cable. Repair or replace the wiring in your active EMG equipped instrument. Fits most active models of EMG guitar and bass pickups.

Quantity

4 conductor pickup wire with braided shielding (28 guage-5 foot roll) Internal wire colors are RED, WHITE, BLACK and GREEN. Used for repairing or wiring 4 wire humbuckers.

Quantity

Enough supplies to shield and wire 1-2 instruments. Includes: Copper Foil (1 piece 4"x12" + 1 piece 1-1/2"x18") Insulated Circuit Wire (3 feet white + 3 feet black) Shielded Wire (1 foot) Heat Shrink Tubing (1 foot 1/16" + 1 foot 1/8")

Quantity

Copper foil shielding tape with conductive adhesive backing. Eliminates background hum and buzz. Includes: one piece 12"x4" (for bottom of control area) and one piece 1-1/2"x18" (for control cavity sides. Enough to shield a medium to large size control area.

Quantity

12 lengths of heat shrink tubing used for guitar wiring and other small projects. Two feet of small (1/16") two feet of medium (1/8") and two feet of large (1/4"). Six feet total.

Quantity

Beldon brand single conductor shielded circuit wire (26 Gauge-3 foot roll). Highest quality, low noise shielded circuit wire available. Specifically designed for use in musical instruments and audio circuits.

Quantity

High quality 22 gauge solid core copper circuit wire with low noise PVC insulation (6 Foot roll-BLACK). Typical wire type used by Gibson and other guitar builders. Recommended for basic wiring projects and bridge/tremolo grounds. Pre-tined for easy soldering.

Quantity

High quality 22 gauge solid core copper circuit wire with low noise PVC insulation (6 Foot roll-BLACK). Typical wire type used by Gibson and other guitar builders. Recommended for basic wiring projects and bridge/tremolo grounds. Pre-tined for easy soldering.

Quantity

High quality 22 gauge solid core copper circuit wire with low noise PVC insulation (6 Foot roll-GRAY). Typical wire type used by Gibson and other guitar builders. Recommended for basic wiring projects and bridge/tremolo grounds. Pre-tined for easy soldering.

Quantity

High quality 22 gauge solid core copper circuit wire with low noise PVC insulation (6 Foot roll-GREEN). Typical wire type used by Gibson and other guitar builders. Recommended for basic wiring projects and bridge/tremolo grounds. Pre-tined for easy soldering.

Quantity

High quality 22 gauge solid core copper circuit wire with low noise PVC insulation (6 Foot roll-RED). Typical wire type used by Gibson and other guitar builders. Recommended for basic wiring projects and bridge/tremolo grounds. Pre-tined for easy soldering.

Quantity

High quality 22 gauge solid core copper circuit wire with low noise PVC insulation (6 Foot roll-WHITE). Typical wire type used by Gibson and other guitar builders. Recommended for basic wiring projects and bridge/tremolo grounds. Pre-tined for easy soldering.

Quantity

High quality 22 gauge solid core copper circuit wire with low noise PVC insulation (6 Foot roll-YELLOW). Typical wire type used by Gibson and other guitar builders. Recommended for basic wiring projects and bridge/tremolo grounds. Pre-tined for easy soldering.

Quantity

High quality 22 gauge stranded copper circuit wire with low noise PVC insulation (6 Foot roll-BLACK). Typical wire type used by Fender and other guitar builders. Recommended for most basic wiring projects. Pre-tined for easy soldering.

Quantity

High quality 22 gauge stranded copper circuit wire with low noise PVC insulation (6 Foot roll-BLUE). Typical wire type used by Fender and other guitar builders. Recommended for most basic wiring projects. Pre-tined for easy soldering.

Quantity

High quality 22 gauge stranded copper circuit wire with low noise PVC insulation (6 Foot roll-GREEN). Typical wire type used by Fender and other guitar builders. Recommended for most basic wiring projects. Pre-tined for easy soldering.

Quantity

High quality 22 gauge stranded copper circuit wire with low noise PVC insulation (6 Foot roll-RED). Typical wire type used by Fender and other guitar builders. Recommended for most basic wiring projects. Pre-tined for easy soldering.

Quantity

High quality 22 gauge stranded copper circuit wire with low noise PVC insulation (6 Foot roll-WHITE). Typical wire type used by Fender and other guitar builders. Recommended for most basic wiring projects. Pre-tined for easy soldering.

Quantity

High quality 22 gauge stranded copper circuit wire with low noise PVC insulation (6 Foot roll-YELLOW). Typical wire type used by Fender and other guitar builders. Recommended for most basic wiring projects. Pre-tined for easy soldering.

Quantity

High quality 26 gauge stranded copper circuit wire with low noise PVC insulation (6 Foot roll-BLACK). Recommended for advanced wiring projects with multiple intricate connections. Pre-tined for easy soldering.

Quantity

High quality 26 gauge stranded copper circuit wire with low noise PVC insulation (6 Foot roll-BLUE). Recommended for advanced wiring projects with multiple intricate connections. Pre-tined for easy soldering.

Quantity

High quality 26 gauge stranded copper circuit wire with low noise PVC insulation (6 Foot roll-GREEN). Recommended for advanced wiring projects with multiple intricate connections. Pre-tined for easy soldering.

Quantity

High quality 26 gauge stranded copper circuit wire with low noise PVC insulation (6 Foot roll-RED). Recommended for advanced wiring projects with multiple intricate connections. Pre-tined for easy soldering.

Quantity

High quality 26 gauge stranded copper circuit wire with low noise PVC insulation (6 Foot roll-WHITE). Recommended for advanced wiring projects with multiple intricate connections. Pre-tined for easy soldering.

Quantity

High quality 26 gauge stranded copper circuit wire with low noise PVC insulation (6 Foot roll-YELLOW). Recommended for advanced wiring projects with multiple intricate connections. Pre-tined for easy soldering.

Quantity